H250 with M9 indicator

The standard solution for the process industry. H250 flowmeters based on the float principle are versatile and can be used for conductive and non-conducting liquids and gases. The sturdy all-metal design ensures high resistance to pressure, temperature and media and stands up to extreme application and environmental conditions. The position of the float is magnetically transmitted to an analog indicator to display the measurement without auxiliary power

Highlights M9 indicator

• Simple, low-cost installation: Measure and display without auxiliary power supply
• Large scale for good readability
• Modular and flexible to adapt to customer-specific applications

          - 2 limit switches (NAMUR or 3-wire transistor)
          - 2-wire analog output 4…20mA with HART - Profibus PA interface
          - 6-digit flow counter with pulse output (non Ex)

• Optional stainless steel housing for corrosive atmospheres
• International approvals for use in hazardous areas (ATEX, FM, CSA, NEPSI) and nuclear power plants (N/NPT stamp)

Highlights H250 measuring cone

• Sturdy stainless steel construction for high operating pressure up to 3000 bar and extreme process temperatures from -200°C to +300°C
• Optionally available with PTFE/ceramic liner for acids and alkalis
• High application security, even with extremely small flows
• Excellent long-term stability
• Upper limit of measurement for liquids: 10 to 120,000 l/h (water: 20°C)
• Upper limit of measurement for gases: 0.7 to 2800 m3/h (air: 20°C, 1.013 bar)
• Accuracy 1.6 % of measured value acc. VDI/VDE 3513-2 (qG=50%)
• Many different process connections

          - Flanges as per EN (DN15-DN100), ASME and JIS
          - Screw and clamp connections

• Special design for the food and pharmaceutical industry with EHEDG approval